This Page Is Still Under Construction.
Sorry.
This is actually something that if you have a little
bit of electronics background, or at least some solderring background,
you can put together fairly fast and easy. All you need are some
ultra-bright LEDs (any color to suit your bike) some resisters
(1/4 to 1/2 watt), and a small strip of project circuit board.
I designed and etched my own boards with a Radio Shack circuit
board etching kit, but the pre drilled project boards will work
just as well. Since my Hawk is mostly silver with blue stripes,
I went with the bright blue LEDs. |
